Description
Specifications
Authentication and security
● Advanced Encryption Standard (AES) for Wi-Fi Protected Access 2 (WPA2)
● 802.1X, RADIUS authentication, authorization, and accounting (AAA)
● 802.11r
● 802.11i
Software
● Cisco Unified Wireless Network Software with AireOS Wireless Controllers Release 8.5 or later
● Cisco Mobility Express
Supported WLAN Controllers
● Cisco 2500 Series Wireless Controllers, Cisco 3500 Series Wireless Controllers, Cisco Wireless Controller Module for ISR G2, Cisco Wireless Services Module 2 (WiSM2) for Catalyst® 6500 Series Switches, Cisco 5500 Series Wireless Controllers, Cisco Flex® 7500 Series Wireless Controllers, Cisco 8500 Series Wireless Controllers, Cisco 9800 series Wireless Controllers,
● Cisco Mobility Express
Maximum clients
● Maximum number of associated wireless clients: 200 per Wi-Fi radio, in total 400 clients per access point
802.11ac
● 2×2 single-user/multiuser MIMO with two spatial streams
● Maximal ratio combining (MRC)
● 20-, 40- and 80-MHz channels
● PHY data rates up to 866.7 Mbps (80 MHz on 5 GHz)
● Packet aggregation: A-MPDU (Tx/Rx), A-MSDU (Rx)
● 802.11 Dynamic Frequency Selection (DFS)
● Cyclic shift diversity (CSD) support
Ethernet ports
● Authentication with 802.1X or MAC filtered
● Dynamic VLAN or per port
● Traffic locally switched or tunneled back to wireless LAN controller
Bluetooth (future availability)
● Integrated Bluetooth 4.1 (including BLE) radio
● Maximum transmit power: 4 dBm
● Antenna gain: 2 dBi
Weight
● Access point without mounting bracket or any other accessories: 14 oz (400 g)
Environmental
● Operating
◦ Temperature: 32° to 104°F (0° to 40°C)
◦ Humidity: 10% to 90% (noncondensing)
◦ Max. altitude: 9843 ft (3000 m) @ 40°C
● Nonoperating (storage and transportation)
◦ Temperature: -22° to 158°F (-30° to 70°C)
◦ Humidity: 10% to 90% (noncondensing)
◦ Max. altitude: 15,000 ft (4500 m) @ 25°C
System
● 1 GB DRAM
● 256 MB flash
● 710 MHz quad core
Input power requirements
● Power injector: AIR-PWRINJ5= or AIR-PWRINJ6=
Powering options
● 802.3af/at Ethernet switch
● Optional Cisco power injectors (AIR-PWRINJ5=, AIR-PWRINJ6=)
Power draw
● 8.3W (maximum, on PoE)
Physical security
● Torx security screw, included with the access point
Mounting
● Included with the access point: mounting bracket AIR-AP-BRACKET8
Accessories
● Mounting bracket: AIR-AP-BRACKET8= (available as spare)
● Physical security kit: AIR-SEC-50= (sold separately), with 50 pcs. Security screws used to secure access point onto wall-mounting bracket, 50 pcs. RJ-45 caps and 2 pcs. unlock keys used to block physical access to Ethernet ports
